Search Results

Internal Wall Insulation About 35% of all heat loss from UK homes is due to un-insulated external walls. Internal wall insulation is perfect for solid wall homes where you can't alter the outside of the property. ​ If your home was built before 1920 there is a strong likelihood that your property has solid walls. ​ You can check your wall type by looking at your brick pattern.​ If some of the bricks are laid with the square end facing, the wall is likely to be solid. If the wall is stone, it is likely to be solid. ​ Internal wall insulation is installed on a room by room basis and is applied to all exterior walls. Polyisocyanurate Insulated (PIR) plaster boards are usually used creating a dry-lined, insulated internal wall. The internal walls are then plastered to leave a smooth and clean surface for redecoration. ​ Bill savings and things to be aware of: ​ Can save between £195-£650 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a sma ll flat to a large detached home). Not only will this make your house warmer in winter but it will also save you money by slowing the loss of heat through un-insulated walls.​ It will slightly reduce the floor area of any rooms which it is applied (roughly about 100mm per wall) Can be quite disruptive to install and does require the removal and re-fixing of items such as switches and radiators. Any issues with penetrating or rising damp must be rectified before install can commence. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

Non-Condensing Gas Boiler Upgrade We can offer a gas boiler upgrade if your current boiler is non-condensing and you own the property you currently live in , through the ECO4 scheme. ​ The new boiler will be a more efficient condensing Gas boiler . ​ Non-Condensing Boiler vs Condensing Gas Boilers ​ All new gas boiler installations must be condensing by law, which came into effect in 2005, however there are a small list of exceptions that can still allow a non-condensing boiler to be installed. ​ Only condensing boilers can be installed under the ECO4 scheme. There is no exceptions made under the scheme. ​ All well designed and maintained boilers burn their fuel efficiently, but non-condensing boilers inevitably lose heat in the form of hot gases that escape up the flue. This limits their overall efficiency. Non-condensing boilers may only have an efficiency rating of 70 to 80 per cent , while in old models this figure could be even lower at 50 to 60 per cent . In contrast, condensing boilers have been designed to minimise this heat loss and have an average efficiency of 95% with some models able to achieve 99% efficiency . Condensing boilers feature larger heat exchangers that cool the flue gases before they escape, condensing the water vapour out of them. The temperature of the flue gases during this heat exchange process drops rapidly from approximately 130℃ to 50℃. The condensation formed as a result is what gives the boilers their name, and there can be as much as two litres of it produced every hour. This condensate liquid is drained into a waste water outlet via a condensate pipe. Thanks to this additional heat exchange process, condensing boilers are able to extract virtually all of the heat latent in the flue gases. This additional heat energy is then transferred back into the heating system. The extra efficiency of condensing boilers means they can offer major cost savings and they are also more environmentally friendly, helping you to lower the carbon emissions of your household. ​ Advantages of condensing gas boilers ​ More energy-efficient as they use more of the fuel for usable heat Lower energy bills Use less fuel than non-condensing boilers to produce same amount of heat and hot water Reduced CO2 emissions and carbon footprint ​ How can I tell which type of boiler I have? There are 2 easy ways to check if your boiler is either condensing or non-condensing and you do not have a manual to hand. ​ If the boiler has a white plastic pipe coming out of the bottom of the boiler and then going outside into a drain, it is condensing . You will usually see the condensate pipe on the exterior wall to the boiler. If the flue is white plastic it is condensing . If it the flue is metal, then it is non-condensing . ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

FAAFESOOTAI MATOU Igoa Telefoni Imeli O le fea tautua e te fiafia iai? Talosaga Faʻagasologa Lagolago Toleniga mo le Aufaigaluega Galue Tupulaga Taʻimua PAS2019 Faʻamaonia Lagolago Faʻamatalaga faʻaopopo e uiga i le ECO3 ae e te leʻi lafoina le pepa agavaʻa Faʻamatalaga faʻaopopo e uiga i ou manaʻoga Faʻafetai mo le auina mai lau suesuega. O se tasi o le 'au o le a faʻafesoʻotaʻi i se taimi vave e mafai ai. Tuʻuina atu Contact: Contact

External Wall Insulation About 35% of all heat loss from UK homes is due to un-insulated external walls. External wall insulation is defined as a layer of insulation that is fixed to an existing external wall. This layer will be finished either with a coat of render or with an alternative cladding to protect it from the elements. External wall insulation is perfect for solid wall homes where you want to improve the look of the exterior of your home and its thermal rating. ​ Bill savings and things to be aware of: Can save between £195-£650 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a small flat to a large detached home). External wall insulation cannot only improve the look of your home, but also improve the weather proofing and sound resistance, alongside reducing drafts and heat loss. Having external wall insulation fitted to your home requires no internal work so the disruption can be kept to a minimum. Some period properties cannot have this installed to the front of the property but can have it installed to the rear. It will also increase the lifespan of your walls as it protects your brickwork, but these do need to be structurally sound before installation. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

Electric Storage Heaters Electric Storage heaters or night storage heaters as they are sometimes called, charge up at night by taking advantage of off-peak electricity rates on Economy 7 & 10 tariffs. Once charged they release their heat during the day. Storage heaters have ceramic or clay bricks in side them which heat up overnight and then this heat is released gradually during the day. ​ Most storage heaters are wall-mounted and will have 2 dials on the top; one for input and the other for output. Newer models will also have digital displays . ​ To operate storage heaters you must set the input in the evening to the expected heat release of the next day. If it is not particularly cold then there is no need to set to maximum as this would waste energy. Most storage heaters will only charge at night time so they can take advantage of the cheaper electricity but some do have a 'boost' button but this would use the more expensive 'day' rate. ​ The output dial is used to regulate how quick the heat is released by the storage heaters, the higher the setting the quicker the heat is released. ​ Modern Storage heaters ​ The latest Electric Storage heaters are much improved on the previous models and can have significant savings on older models. The new modern High heat retention Electric Storage heaters are also smaller and more compact that the older models and you can also purchase 'Solar enabled' Storage heaters that also take advantage of Solar PV during the day. ​ It is possible to have Electric Storage heaters installed under the ECO4 scheme if you own your home and you have older heaters present or if you have no heating, electric room heaters or old electric storage heaters & have Solar PV installed as well then they can be installed in owner occupied or rented properties. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

Air Source Heat Pump Air source heat pumps (ASHPs) absorb heat from the outside air to heat your home and hot water. They can still extract heat when air temperatures are as low as -15°C. Air source heat pumps need electricity to run, but because they are extracting renewable heat from the environment, the heat output is greater than the electricity input. This makes them an energy efficient method of heating your home. Think of an air source heat pump as a 'reverse fridge'. Heat is absorbed from the outdoor air and is compressed to raise the temperature. This then works to heat your home and hot water. Before thinking about an ASHP you must consider the following : Do you have somewhere to put it? You’ll need a place outside your home where a unit can be fitted to a wall or placed on the ground. It will need plenty of space around it to get a good flow of air. A sunny wall is ideal. The external unit is connected to an internal unit containing circulation pumps and hot water, which is usually smaller than the average boiler. What type of heating system do you have now? Homes without an existing central heating system will require one to be installed for an air source heat pump to work. What fuel will you be replacing? The system is more likely to pay for itself if it’s replacing an expensive system like electric heating. You’re unlikely to save much on your heating bill if you’re switching from mains gas. ​ Air source heat pumps can be installed as one of two varieties: ​ Air-to-Water Heat Pumps: These are the most common in the UK, transferring the heat into water which can then be used for traditional home heating elements. Air-to-Air Heat Pump s: These work with a circulation system to heat the air itself. ​ The main benefit of an air source heat pump is a more energy efficient method of heating your home, due to it producing around 3.5 kW of heat for every 1kW of energy used. This efficiency also brings a great saving on your carbon footprint of between 2,150 to 2,250 kg of carbon a year, compared to an A-rated boiler according to the Energy Saving Trust. Only air to water heat pumps are included in funding schemes. Currently the ECO4 Scheme offer fully funded options, subject to qualifying criteria. To find out what these are follow the link below; ​ ECO4 ​ Air source heat pumps offer a great alternative to LPG gas & oil boilers, electric room heaters and electric storage heaters but to work at their best your home needs to be a well insulated home. ​ If you are looking to spend money on a new heating system but insulation in your home is not up to standard, an air source heat pump would not be a sound investment for the future. ​ Air source heat pumps work best at producing heat at a lower temperature than boilers so if you have an draught proof home this will increase the efficiency. ​ It is also worth keeping in mind that while it is possible that if you are changing from a boiler to an Air source heat pump that you could use the existing pipework and radiators, this is not guaranteed and it is very likely that all will need to be replaced. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply Now

Flat Roof Insulation A fl at roof is any roof space in your home with a pitch of less than 10 degrees. They are very easy to spot and as they don't usually have a loft space, they wont have a loft hatch. ​ F lat roofs being added to properties were popular in properties built between the 1950's - 1970's and if your flat roof is from this period, it is extremely unlikely to be insulated and if it is, it wont be up to todays standards. If your flat roof is uninsulated, it will mean that in winter, warm air will easily escape from any heated rooms through the flat roof, leaving the room cold and uninviting. ​ If you have recently had the membrane replaced if for example you had a leak, then it is unlikely that insulation was added, unless you specifically asked for it. ​ There are 2 ways to insulate your flat roof: ​ Warm Roof: ​ This involves adding rigid insulation board on to the roof from the outside and then coving with a waterproof membrane. This is the best way to insulate a flat roof as there are no condensation issues to contend with. Cold Roof: ​ This is the most common way that most households have their flat roofs insulated. It involves placing the insulation material between the joists spaces the support the roof. This can only be added if there is a gap of at least 50mm between the roof and the insulation to allow for air flow. ​ If you have very shallow joists then this is not recommended. As most heat is lost through uninsulated roof spaces, if you do have your flat roof insulated you can expect similar savings to insulating your loft depending on how much of your property the flat roof covers. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

Smart Heating Controls Smart heating controls allow you to control your heating from your mobile phone or tablet via an app. Obviously for these to work, you do need an active internet connection. ​ They allow you to have greater control over your home heating by giving you access while you are on the move, so that if you are out, you can always return to a nice warm home. ​ There are several different products available, with varying levels of features available. ​ Within the ECO4 scheme there are several products that can be installed; from smart controls to Time and Temperature zone controls that allow for a minimum of 2 heating zones in your property so that instead of heating your whole house, you could turn the heating off in a zone your are not currently in. This is usually set to upstairs and downstairs but it is also possible to have multiple zones, through additional smart TRV's being added. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

First Time Central Heating If you currently live in a property that does not have a central heating system, you will be paying more to heat your home than a property with a central heating system. ​ Below are some examples of properties that would be considered to have no central heating system present. ​ Electric room heaters, including direct acting room heaters, fan heaters and inefficient electric storage heaters Gas room heaters Gas fire with back boiler Solid fossil fuel fire with back boiler Direct electric underfloor or ceiling heating (not connected to an electric boiler) Bottled LPG room heating Solid fossil fuel room heaters Wood/biomass room heating Oil room heater No heating at all ​ With the push towards renewable heating, it may become more difficult in the future to have a gas supply fitted at your property. It is certainly the case with heating grants as if you want gas central heating, you must live in a property that has an existing gas supply and meter that has never had central heating installed. ​ ​ The following may be installed as FTCH: ​ Gas Boiler ​Biomass Boiler​ Air Source Heat Pump Ground Source Heat Pump ​ ​ Bill savings and things to be aware of: ​ The exact savings depend on what the pre-main heating system was and what has now been installed. This makes it difficult to give a fair bill saving. All properties must have loft or room in roof insulation and cavity or solid wall insulation (if able to be installed) either already present or installed before Gas First Time Central Heating is completed to access ECO4 funding for First Time Central Heating. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding