top of page

Search Results

42 elementos encontrados para ""

  • Inefficient Gas Boiler Upgrade | ECO Simplified Limit

    Non-Condensing Gas Boiler Upgrade We can offer a gas boiler upgrade if your current boiler is non-condensing and you own the property you currently live in , through the ECO4 scheme. ​ The new boiler will be a more efficient condensing Gas boiler . ​ Non-Condensing Boiler vs Condensing Gas Boilers ​ All new gas boiler installations must be condensing by law, which came into effect in 2005, however there are a small list of exceptions that can still allow a non-condensing boiler to be installed. ​ Only condensing boilers can be installed under the ECO4 scheme. There is no exceptions made under the scheme. ​ All well designed and maintained boilers burn their fuel efficiently, but non-condensing boilers inevitably lose heat in the form of hot gases that escape up the flue. This limits their overall efficiency. Non-condensing boilers may only have an efficiency rating of 70 to 80 per cent , while in old models this figure could be even lower at 50 to 60 per cent . In contrast, condensing boilers have been designed to minimise this heat loss and have an average efficiency of 95% with some models able to achieve 99% efficiency . Condensing boilers feature larger heat exchangers that cool the flue gases before they escape, condensing the water vapour out of them. The temperature of the flue gases during this heat exchange process drops rapidly from approximately 130℃ to 50℃. The condensation formed as a result is what gives the boilers their name, and there can be as much as two litres of it produced every hour. This condensate liquid is drained into a waste water outlet via a condensate pipe. Thanks to this additional heat exchange process, condensing boilers are able to extract virtually all of the heat latent in the flue gases. This additional heat energy is then transferred back into the heating system. The extra efficiency of condensing boilers means they can offer major cost savings and they are also more environmentally friendly, helping you to lower the carbon emissions of your household. ​ Advantages of condensing gas boilers ​ More energy-efficient as they use more of the fuel for usable heat Lower energy bills Use less fuel than non-condensing boilers to produce same amount of heat and hot water Reduced CO2 emissions and carbon footprint ​ How can I tell which type of boiler I have? There are 2 easy ways to check if your boiler is either condensing or non-condensing and you do not have a manual to hand. ​ If the boiler has a white plastic pipe coming out of the bottom of the boiler and then going outside into a drain, it is condensing . You will usually see the condensate pipe on the exterior wall to the boiler. If the flue is white plastic it is condensing . If it the flue is metal, then it is non-condensing . ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

  • ECO4 Scheme, Free Gas Boiler Upgrade & Insulation Grants | ECO Simplified

    Home: Welcome Warmer Home with the ECO4 Schem e Free Gas Boiler upgrade, First Time Central Heating, Air Source Heat Pump, Solar PV & Insulation available. Click Apply Now to find out if your qualify! Apply Now Home: Services You are eligible for the ECO4 scheme if you or someone in your home claim qualifying ECO4 Benefit? ​ You can qualify if you rent or own your property (some restrictions apply).​ ​ If you do not claim a qualifying benefit, then you may still qualify if your household income is less than £31,000 or if you or someone in your home suffers from an eligible medical condition. (LA Flex). ​ Just complete our quick and easy application form and we will check if you are eligible. Apply Now The Energy Company Obligation (ECO) is a government energy efficiency scheme that covers England, Scotland & Wales to help reduce carbon emissions and tackle fuel poverty. ​ The scheme began in April 2013, and over time it has been amended. The ECO3 scheme closed on 31 March 2022. The latest policy, ECO4, applies to measures completed from 1 April 2022 and will cover a four year period until 31 March 2026. ECO4 Qualifying Benefits: ​ Income based Jobseekers Allowance (JSA) Income related Employment and Support Allowance (ESA) Income Support (IS) Pension Credit Guaranteed Credit (PCGC) Pension Credit Savings Credit (PCSC) Working Tax Credit (WTC) Child Tax Credit (CTC) Universal Credit (UC) Housing Benefit Child Benefit (Subject to income - please see below) ​ Single Claimant: Qualifying Maximum Household Income: 1 Child (up to age 18) - £19,900 2 Children (up to age 18) - £24,800 3 Children (up to age 18) - £29,600 4 Children (up to age 18) - £34,500 Member of Couple: Qualifying Maximum Household Income: ​ 1 Child (up to age 18) - £27,500 2 Children (up to age 18) - £32,300 3 Children (up to age 18) - £37,200 4 Children (up to age 18) - £42,000 Heating upgrades available FREE with the ECO4 scheme To learn more about the potential upgrade please click the link below or if you want to go ahead and apply please click 'Apply Now'. ​ Please note: Gas boiler upgrades are only available to customers who own their property. Gas boiler first time central heating can only be installed in properties that have never had a wet central heating system. To have either a gas boiler upgrade or first time central heating your property must have had a gas meter fitted prior to the 1st April 2022 and it must also be present immediately prior to install. Solar PV can only be installed along with an Air source heat pump, Electric storage heaters or in properties where these have already been installed. If you own your home and have old Electric storage heaters you may qualify for new High heat retention Electric storage heaters. If your home has a cavity wall or any roof insulation that is not insulated this will also need to be installed FREE as part of the project. ​ We will assess your property and if there is any additional insulation needed, it will be discussed with you and will be FREE if you qualify through the ECO4 scheme. Gas Boiler Upgrade Learn More Apply Now Gas First Time Central Heating Learn more Apply Now Air Source Heat Pump Learn More Apply Now Electric Storage Heater Upgrade Learn More Apply Now Solar PV Learn More Apply Now Smart Heating Controls Learn More Apply Now Insulation available FREE with the ECO4 scheme To learn more about the Insulation that is available FREE on the ECO4 scheme, please click the link below or if you want to go ahead and apply please click 'Apply Now'. ​ Cavity Wall Insulation Learn More Apply Now Internal Wall Insulation Learn More Apply Now External Wall Insulation Learn More Apply Now Room in Roof Insulation Learn More Apply Now Flat Roof Insulation Learn More Apply Now Loft Insulation Learn More Apply Now Underfloor Insulation Learn More Apply Now ¿Qué sucede después de solicitar financiación? El proceso de solicitud de financiación ECO3 es sencillo. Al hacer clic en "solicitar ahora" y completar nuestro formulario, podremos verificar su elegibilidad y organizar una encuesta e instalación. Lo llamaremos y confirmaremos los detalles que nos ha proporcionado y que aún desea continuar. ​ Discutiremos con usted lo que podría instalarse en su propiedad y reservaremos una encuesta para que se realice en un momento conveniente para usted. Se completará una encuesta GRATUITA sin compromiso en su propiedad. ​ La empresa instaladora confirmará con usted qué se puede instalar y si debe pagar una contribución para cubrir los trabajos adicionales necesarios. ​ Puede cancelar en cualquier momento antes de la instalación, ya que se llevó a cabo de forma GRATUITA. Solicitar financiación Se acordará una fecha para completar el trabajo y habrá algunos trámites para firmar. ​ Todo el trabajo es realizado por personas calificadas y cubierto por una garantía respaldada por un seguro. Home: Contact CONTÁCTENOS Complete el formulario si está interesado en utilizar uno de nuestros servicios de instalador. Edificio de Comisionados, 4 St Thomas 'Street, Sunderland, SR1 1NW info@ecosimplified.co.uk 0191 3592042 Nombre Teléfono Correo electrónico ¿Qué servicio le interesa? Soporte de procesamiento de envíos Capacitación de envío de personal Generación líder Soporte de acreditación PAS2019 Información adicional sobre ECO3 antes de enviar el formulario de elegibilidad Información adicional sobre sus requisitos Gracias por enviar tus datos. Uno del equipo lo llamará para discutir sus requisitos. Enviar

  • External Wall Insulation | ECO Simplified Limit

    External Wall Insulation About 35% of all heat loss from UK homes is due to un-insulated external walls. External wall insulation is defined as a layer of insulation that is fixed to an existing external wall. This layer will be finished either with a coat of render or with an alternative cladding to protect it from the elements. External wall insulation is perfect for solid wall homes where you want to improve the look of the exterior of your home and its thermal rating. ​ Bill savings and things to be aware of: Can save between £195-£650 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a small flat to a large detached home). External wall insulation cannot only improve the look of your home, but also improve the weather proofing and sound resistance, alongside reducing drafts and heat loss. Having external wall insulation fitted to your home requires no internal work so the disruption can be kept to a minimum. Some period properties cannot have this installed to the front of the property but can have it installed to the rear. It will also increase the lifespan of your walls as it protects your brickwork, but these do need to be structurally sound before installation. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

  • Flat Roof Insulation | ECO Simplified Limit

    Flat Roof Insulation A fl at roof is any roof space in your home with a pitch of less than 10 degrees. They are very easy to spot and as they don't usually have a loft space, they wont have a loft hatch. ​ F lat roofs being added to properties were popular in properties built between the 1950's - 1970's and if your flat roof is from this period, it is extremely unlikely to be insulated and if it is, it wont be up to todays standards. If your flat roof is uninsulated, it will mean that in winter, warm air will easily escape from any heated rooms through the flat roof, leaving the room cold and uninviting. ​ If you have recently had the membrane replaced if for example you had a leak, then it is unlikely that insulation was added, unless you specifically asked for it. ​ There are 2 ways to insulate your flat roof: ​ Warm Roof: ​ This involves adding rigid insulation board on to the roof from the outside and then coving with a waterproof membrane. This is the best way to insulate a flat roof as there are no condensation issues to contend with. Cold Roof: ​ This is the most common way that most households have their flat roofs insulated. It involves placing the insulation material between the joists spaces the support the roof. This can only be added if there is a gap of at least 50mm between the roof and the insulation to allow for air flow. ​ If you have very shallow joists then this is not recommended. As most heat is lost through uninsulated roof spaces, if you do have your flat roof insulated you can expect similar savings to insulating your loft depending on how much of your property the flat roof covers. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

  • Room in Roof Insulation | ECO Simplified Limit

    Room in Roof Insulation Up to 25% of heat loss in a home can be attributed to an un-insulated roof space. ​ ​ A room-in-roof or attic room is simply defined by the presence of a fixed staircase to access the room and there should be a window Many older properties that were originally built with loft room space or 'room-in-roof' were either not insulated at all or insulated using inadequate materials and techniques when compared to today's building regulations. . ​ By using the latest insulation materials and methods, insulating existing attic rooms means that you can still use the roof space for storage or additional room space if needed while still trapping heat in the property and rooms below. ​ Bill savings and things to be aware of: ​ Can save between £500-£690 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a Mid-terrace house to a detached home). Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

  • Contact | ECO Simplified

    CONTÁCTENOS Nombre Teléfono Correo electrónico ¿Qué servicio le interesa? Soporte de procesamiento de envíos Capacitación de envío de personal Generación líder Soporte de acreditación PAS2019 Información adicional sobre ECO3 antes de enviar el formulario de elegibilidad Información adicional sobre sus requisitos Gracias por enviar su consulta. Uno de los miembros del equipo se pondrá en contacto lo antes posible. Enviar Contact: Contact

  • Internal Wall Insulation | ECO Simplified Limit

    Internal Wall Insulation About 35% of all heat loss from UK homes is due to un-insulated external walls. Internal wall insulation is perfect for solid wall homes where you can't alter the outside of the property. ​ If your home was built before 1920 there is a strong likelihood that your property has solid walls. ​ You can check your wall type by looking at your brick pattern.​ If some of the bricks are laid with the square end facing, the wall is likely to be solid. If the wall is stone, it is likely to be solid. ​ Internal wall insulation is installed on a room by room basis and is applied to all exterior walls. Polyisocyanurate Insulated (PIR) plaster boards are usually used creating a dry-lined, insulated internal wall. The internal walls are then plastered to leave a smooth and clean surface for redecoration. ​ Bill savings and things to be aware of: ​ Can save between £195-£650 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a sma ll flat to a large detached home). Not only will this make your house warmer in winter but it will also save you money by slowing the loss of heat through un-insulated walls.​ It will slightly reduce the floor area of any rooms which it is applied (roughly about 100mm per wall) Can be quite disruptive to install and does require the removal and re-fixing of items such as switches and radiators. Any issues with penetrating or rising damp must be rectified before install can commence. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

  • Electric Storage Heaters | ECO Simplified Limit

    Electric Storage Heaters Electric Storage heaters or night storage heaters as they are sometimes called, charge up at night by taking advantage of off-peak electricity rates on Economy 7 & 10 tariffs. Once charged they release their heat during the day. Storage heaters have ceramic or clay bricks in side them which heat up overnight and then this heat is released gradually during the day. ​ Most storage heaters are wall-mounted and will have 2 dials on the top; one for input and the other for output. Newer models will also have digital displays . ​ To operate storage heaters you must set the input in the evening to the expected heat release of the next day. If it is not particularly cold then there is no need to set to maximum as this would waste energy. Most storage heaters will only charge at night time so they can take advantage of the cheaper electricity but some do have a 'boost' button but this would use the more expensive 'day' rate. ​ The output dial is used to regulate how quick the heat is released by the storage heaters, the higher the setting the quicker the heat is released. ​ Modern Storage heaters ​ The latest Electric Storage heaters are much improved on the previous models and can have significant savings on older models. The new modern High heat retention Electric Storage heaters are also smaller and more compact that the older models and you can also purchase 'Solar enabled' Storage heaters that also take advantage of Solar PV during the day. ​ It is possible to have Electric Storage heaters installed under the ECO4 scheme if you own your home and you have older heaters present or if you have no heating, electric room heaters or old electric storage heaters & have Solar PV installed as well then they can be installed in owner occupied or rented properties. ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. Apply for Funding

  • Awards | ECO Simplified Limit

    ECO Simplified Shortlisted for StartUp Awards National Series Sunderland-based Eco Simplified has been named one of the most exciting new businesses in the region after being shortlisted as part of a brand-new awards programme. The StartUp Awards National Series has been launched to recognise the booming startup scene across the UK which has accelerated since the pandemic began. In 2020, when most of the world was shutting down, more than 400,000 start-ups were set up in Britain, with similar increases seen in other European countries. There was stiff competition with over 2,500 applications received in response to the Startup Awards National Series’ first-ever call for entries. James Aspey, Director of Eco Simplified said: It is a privilege to work in an industry where every day we can make a difference to people living in fuel poverty, whilst making a positive difference to the environment. Big thank you to the team at Eco Simplified, I am so proud of you all. Supported nationally by BT, EY, Dell & Intel, the programme will celebrate the achievements of the amazing individuals across the UK who have turned an idea into an opportunity and taken the risk to launch a new product or service. Co-founded by the team behind the Great British Entrepreneur Awards, the new series follows the success of the Wales StartUp Awards, after organisers recognised the exceptional potential in the startup scene across the other British regions. Professor Dylan Jones-Evans OBE, the creator of the StartUp Awards National Series, said: “​​New firms are important for generating economic prosperity, employment opportunities and innovation. Since 2016, the Wales StartUp Awards have celebrated this amazing annual contribution to our economy by entrepreneurs and the impact they have on communities across the nation. “Given the sheer volume of phenomenal start-ups we’ve heard from since then, as well as the huge post-pandemic shift in people’s desires to take their career in a new direction and set up a business against the odds, we felt it was the right time to take the programme nationwide. We have been blown away by the standard of entries in this first year and truly look forward to crowning the winners in June.”

  • Landlord Insulation & Heating Grants | ECO Simplified Limit

    Subvenciones ECO3 para propietarios Es el inquilino de una propiedad que puede calificar para la financiación ECO3, si está recibiendo un beneficio elegible. ​ Hay varias razones por las que un propietario querría que sus inquilinos usaran este esquema. Actualizar la calefacción e instalar un nuevo aislamiento en una propiedad no solo aumenta su valor, sino que también, sus inquilinos ahorran dinero en sus facturas de energía y se sienten más cómodos en su entorno. También ayuda a atraer nuevos inquilinos cuando la propiedad está vacía. ​ Todas las propiedades en el sector de alquiler privado en Inglaterra y Gales deben tener una calificación EPC de al menos una calificación 'E' a menos que estén exentas. Si su propiedad está por debajo de una calificación 'E', está limitado a lo que su inquilino puede haber instalado inicialmente. Las medidas disponibles para una propiedad con calificación 'F' o 'G' son Aislamiento de pared sólida (aislamiento interno o externo) y calefacción central por primera vez. Cualquiera de estos debe llevar su propiedad por encima de una calificación 'E', lo que significa que puede instalar aislamiento o calefacción adicional. ​ El esquema otorga una cantidad fija que cubre la propiedad, en cambio, cada medida atrae fondos en una puntuación que se calcula según el tipo de propiedad, el número de dormitorios y el tipo de calefacción previa a la instalación. Hay elevaciones adicionales si, por ejemplo, su propiedad no utiliza calefacción de gas de la red. Esto puede significar que podría tener varias medidas instaladas sin costo alguno para usted, pero usted y sus inquilinos obtienen todos los beneficios. ​ Estos beneficios incluyen: ​ Mejora el valor y la condición de la propiedad. Reduce las facturas de energía para inquilinos nuevos y existentes Hace de su propiedad un lugar más cómodo para vivir Ayuda a mantener y atraer nuevos inquilinos Facilita la venta de la propiedad Ayuda a proteger el medio ambiente. ​ No hay ningún costo para verificar la elegibilidad o para pasar por el proceso de encuesta y si se requiere alguna contribución, puede decir que no en cualquier momento antes de la instalación. ​ Además, ningún instalador instalará nada en su propiedad sin el permiso por escrito del propietario. Solicitamos los detalles de los propietarios para que, si un inquilino nos envía una verificación de elegibilidad, podamos asegurarnos de que el propietario está al tanto y también de qué medidas puede tener derecho a instalar su propiedad. ​ Hay una descripción del esquema y lo que potencialmente puede haber instalado en su propiedad a continuación o si su arrendador lo envió aquí, haga clic en el botón 'Solicitar financiamiento'. ​ ​ ​ Solicitar financiación ¿Qué pueden haber instalado los inquilinos bajo el esquema ECO3? Hemos enumerado el reemplazo de calefacción, las actualizaciones de calefacción y el aislamiento que puede instalar bajo el esquema ECO3 si es un inquilino. ​ Puede instalar aislamiento junto con calefacción y otras medidas de aislamiento, por lo que cuando nos comuniquemos con usted le daremos una imagen completa de lo que creemos que podría haber instalado. Cuando haya completado la encuesta, esto se confirmará con usted. CALEFACCIÓN CENTRAL POR PRIMERA VEZ Todos los clientes que viven en una propiedad que nunca ha tenido un sistema de calefacción central y tiene uno de los siguientes como fuente de calefacción principal son elegibles para recibir financiación para instalar la calefacción central por primera vez. ​ Calentadores de ambiente eléctricos, incluidos calentadores de ambiente de acción directa, calentadores de ventilador y calentadores de almacenamiento eléctrico ineficientes Calentadores de gas para habitaciones Fuego de gas con caldera trasera Fuego de combustibles fósiles sólidos con caldera trasera Calefacción eléctrica directa por suelo radiante o techo (no conectada a una caldera eléctrica) Calefacción de sala de GLP envasado Calentadores de sala de combustibles fósiles sólidos Calefacción de salas de madera / biomasa Calentador de sala de aceite Sin calefacción en absoluto ​ Si desea calefacción central de gas, debe vivir en una propiedad que tenga una nueva conexión de gas o una conexión de gas que nunca se haya utilizado para calefacción. La financiación ECO no cubre el costo de una conexión de gas, pero otras subvenciones pueden, como subvenciones de las autoridades locales. ​ Lo siguiente se puede instalar como FTCH: ​ Caldera de gas ​ Caldera de biomasa ​ Caldera de GLP embotellada Caldera de GLP Bomba de calor de fuente de aire Bomba de calor de fuente terrestre Caldera electrica ​ Todas las propiedades deben tener aislamiento de loft o espacio en el techo y aislamiento de la pared de la cavidad (si se puede instalar) ya sea presente o instalado antes de que se complete la calefacción central por primera vez. Esto es algo que el instalador discutirá con usted en ese momento y puede ser financiado por ECO. ACTUALIZACIÓN DEL CALENTADOR DE ALMACENAMIENTO ELÉCTRICO Si actualmente está utilizando calentadores de habitación eléctricos para calentar su hogar, la actualización a los calentadores de almacenamiento eléctricos de alta retención de calor mejorará la calidez y la eficiencia de su propiedad. Los calentadores eléctricos de almacenamiento funcionan utilizando electricidad fuera de horas pico (generalmente durante la noche) y almacenan el calor que se libera durante el día. Para ello, los calentadores de almacenamiento tienen un núcleo altamente aislado, compuesto por un material de muy alta densidad. Están diseñados para retener el calor almacenado durante el mayor tiempo posible. Los calentadores de almacenamiento usan energía fuera de las horas pico porque es más barata que la electricidad de tarifa estándar. Por lo general, tendrán un circuito totalmente separado del resto de su hogar y solo se encenderán cuando comience el período de menor actividad. Después de que el instalador se comunique con usted, el cálculo de calor está hecho para determinar la cantidad y el tamaño correctos de calentadores eléctricos de almacenamiento que necesita para su propiedad. Debe tener una tarifa Economy 7 o tener instalado un medidor Economy 7 tener calentadores eléctricos de almacenamiento instalados. ​ La propiedad debe tener una calificación AE en su último EPC para calificar para esta medida. AISLAMIENTO DE PARED DE CAVIDAD Aproximadamente el 35% de toda la pérdida de calor de los hogares del Reino Unido se produce a través de paredes externas sin aislamiento. Si su casa fue construida después de 1920, existe una gran probabilidad de que su propiedad tenga paredes huecas. Una pared de la cavidad se puede llenar con un material aislante inyectando perlas en la pared. Esto restringe el paso de calor entre ellos, reduciendo el dinero que gasta en calefacción. ​ Puede verificar su tipo de pared mirando su patrón de ladrillos. Si los ladrillos tienen un patrón uniforme y están colocados a lo largo, es probable que la pared tenga una cavidad. Si algunos de los ladrillos se colocan con el extremo cuadrado orientado, es probable que la pared sea sólida. Si la pared es de piedra, es probable que sea sólida. ​ Si su casa se construyó en los últimos 25 años, es probable que ya esté aislada o posiblemente parcialmente aislada. El instalador puede comprobar esto con una inspección con boroscopio. ​ La propiedad debe tener una calificación AE en su último EPC para calificar para esta medida AISLAMIENTO DE PARED EXTERNO El aislamiento de paredes externas es perfecto para casas de paredes sólidas donde desea mejorar el aspecto del exterior de su hogar y mejorar su clasificación térmica. Tener aislamiento de pared externo instalado en su hogar no requiere trabajo interno, por lo que la interrupción se puede reducir al mínimo. Es posible que se requiera un permiso de planificación, así que consulte con su autoridad local antes de instalarlo en su propiedad. Algunas propiedades de época no pueden tener esto instalado en el frente de la propiedad, pero pueden tenerlo instalado en la parte trasera. El aislamiento de la pared externa no solo puede mejorar el aspecto de su hogar, sino que también mejora la impermeabilización y la resistencia al sonido, junto con reduciendo corrientes de aire y pérdida de calor. También aumentará la vida útil de sus paredes ya que protege sus ladrillos, pero estos deben ser estructuralmente sólidos antes de la instalación. AISLAMIENTO INTERIOR DE PARED El aislamiento de paredes internas es perfecto para casas de paredes sólidas donde no se puede alterar el exterior de la propiedad. ​ Si su casa fue construida antes de 1920, existe una gran probabilidad de que su propiedad tenga paredes sólidas. ​ Puede verificar su tipo de pared mirando su patrón de ladrillos. ​ Si algunos de los ladrillos se colocan con el extremo cuadrado orientado, es probable que la pared sea sólida. Si la pared es de piedra, es probable que sea sólida. ​ El aislamiento de la pared interna se instala habitación por habitación y se aplica a todas las paredes exteriores. Las placas de yeso con aislamiento de poliisocianurato (PIR) se utilizan generalmente para crear una pared interna aislada y revestida en seco. Las paredes internas se enyesan para dejar una superficie lisa y limpia para la redecoración. ​ Esto no solo hará que su casa sea más cálida en invierno, sino que también le ahorrará dinero al disminuir la pérdida de calor a través de paredes sin aislamiento. ​ Reducirá ligeramente el área del piso de cualquier habitación en la que se aplique (aproximadamente 10 cm por pared) AISLAMIENTO DEL DESVÁN El calor de su casa aumenta, lo que hace que aproximadamente una cuarta parte del calor generado se pierda a través del techo de una casa sin aislamiento. Aislar el techo de su casa es la forma más sencilla y rentable de ahorrar energía y reducir sus facturas de calefacción. El aislamiento debe aplicarse al área del desván a una profundidad de al menos 270 mm, tanto entre las viguetas como por encima, ya que las viguetas mismas crean un "puente de calor" y transfieren el calor al aire de arriba. Con técnicas y materiales de aislamiento modernos, todavía es posible usar el espacio para almacenamiento o como un espacio habitable con el uso de paneles de piso aislantes. ​ La propiedad debe tener una calificación AE en su último EPC para calificar para esta medida HABITACIÓN EN TECHO Hasta el 25% de la pérdida de calor en una casa se puede atribuir a un espacio en el techo sin aislamiento. Las subvenciones ECO pueden cubrir el costo total de tener todas las habitaciones tipo loft aisladas según las regulaciones de construcción vigentes utilizando los últimos materiales de aislamiento. ​ Muchas propiedades más antiguas que se construyeron originalmente con espacio de habitación tipo loft o 'habitación en el techo' no estaban aisladas en absoluto o se aislaron con materiales y técnicas inadecuados en comparación con las regulaciones de construcción actuales. Una habitación en el techo o en el ático se define simplemente por la presencia de una escalera fija para acceder a la habitación y debe haber una ventana. ​ Al utilizar los últimos materiales y métodos de aislamiento, aislar las habitaciones del ático existentes significa que aún puede usar el espacio del techo para almacenamiento o espacio adicional en la habitación si es necesario mientras sigue atrapando el calor en la propiedad y las habitaciones de abajo. ​ La propiedad debe tener una calificación AE en su último EPC para calificar para esta medida AISLAMIENTO DE SUELO Cuando piense en áreas de su hogar que necesitan aislamiento, debajo del piso no suele ser el primero en la lista. Sin embargo, las casas con espacios debajo del piso de abajo pueden beneficiarse del aislamiento por debajo del piso. El aislamiento debajo del piso elimina las corrientes de aire que pueden ingresar a través de los espacios entre las tablas del piso y el suelo, lo que lo hace sentir más cálido y, de acuerdo con Energy Saving Trust, ahorre hasta £ 40 por año. ​ La propiedad debe tener una calificación AE en su último EPC para calificar para esta medida Solicitar financiación

  • Cavity Wall Insulation | ECO Simplified Limit

    Cavity Wall Insulation About 35% of all heat loss from UK homes is due to un-insulated external walls. If your home was built after the 1930s, the chances are that its external walls are made of two ‘skins’ with a small gap between them. This means they are ‘cavity walls’ and the gap between them can be filled with insulating material to stop the warmth escaping to the outside. ​ A cavity wall can be filled with an insulating material by injecting beads into the wall. This restricts any warmth passing through the wall, reducing the money you spend on heating. ​ You can check your wall type by looking at your brick pattern. If the bricks have an even pattern and are laid lengthways, then the wall is likely to have a cavity. If some of the bricks are laid with the square end facing, the wall is likely to be solid. If the wall is stone, it is likely to be solid. ​ If your home was built within the last 25 years it is likely to been already insulated or possibly partially insulated. The surveyor can check this with a borescope inspection. Bill savings and things to be aware of: ​ Can save between £145-£480 a year on your fuel bills depending on property size (Figures from the Energy Saving Trust and assume property is a gas heated home and sized between a flat to a detached home). Walls are normally drilled and then filled from the outside, which minimises disruption and mess. Can be completed in a few hours. Grant funding is available that can cover the full cost of installation (qualifying criteria apply). ​ To check if you are eligible under the ECO4 scheme, please click the button below and complete the online form. ​ Apply for Funding

bottom of page